Concrete Mixing Plant in the operation will be a steady stream of dirty water, these dirty water both for the enterprise and the surrounding environment is a more difficult to deal with the problem. If placed in the site, it is necessary to establish a special pool to hold, increasing the cost of the site. If blindly discharged to the surrounding area, it is also difficult to rectify the environment is a dirty point. Often factories encountered in this type of situation, it is necessary to introduce scientific means to deal with it.
Concrete Batching Plant dirty water is difficult to deal with, but there is no way to deal with it. First of all, the idea should be determined, determined not to pollute the environment as a prerequisite. Then a special dirty water holding tank needs to be established to carry out the wastewater precipitation process. Digging a holding tank although it will increase some site costs, but the waste water stored in the holding tank after precipitation, it can be repeated many times, which invariably also reduces the investment in the operating process. In addition, after the precipitation of the water can also be flushed on the site to reduce dust, reduce the percentage of air dust in the mixing plant.
Concrete Batching Plants discharge water pond also need to be regularly removed, the bottom of the sludge is too thick will affect the use of the pond. Wastewater can also be used similar to domestic wastewater wells buried method, digging wells filled, take the upper layer of water to do the mixing plant concrete ready-mixed supplemental water.
Concrete Mixer
