Spiral Pipe Screw Conveyor
(Total 5 Products)-
Brand:XINFENGTransportation:Ocean,Land,AirPackaging:20GPScrew Conveyor Screw conveyors is mainly used for transporting cement and fly ash in concrete batching plant. It can also be used in chemical, metallurgy, granary processing, warehousing. It is applicable to transport various kinds of loose material...
-
Brand:XINFENGTransportation:Ocean,Land,AirPackaging:20GPScrew Conveyor During the no-load test, the bearing should be oil-tight, and the bearing temperature should not be higher than 20℃. During the load test,the temperature of bearing should not exceed 30℃. Technical Parameter Pre-sale service: site...
-
Brand:XINFENGTransportation:Ocean,Land,AirPackaging:20GPScrew Conveyor Our screw conveyors has advantages of small diameter, high speed, large transport capacity, high precision, and good transmission condition. The conveyor made of high-quality seamless has good rigidity and is easy to dismount and...
-
Brand:XINFENGTransportation:Ocean,Land,AirPackaging:20GPScrew Conveyor Series The screw conveyor has the advantages of simple structure, small volume, good tightness, safe and convenient operation, low manufacture cost. We have a lot of stock for screw conveyor in general diameters : 219mm,273mm, 325mm....
-
Brand:XINFENGTransportation:Ocean,Land,AirPackaging:20GPScrew Conveyor Screw conveyors is mainly used for transporting cement and fly ash in concrete bating plant.Cement Silo Screw Conveyor Technical Parameter working principle: When the screw shaft rotating, the gravity of the material and the friction...
Install adjustment:
1.The screw conveyor can not be installed until the dust stuck during transportation or unloading
is cleaned.
2.Material groove center line and screw shaft should have an appropriate coaxial degree.
3.The drive device and the screw shaft should have a right coaxial degree.
4.The static equilibrium test should be carried out after the screw is installed.
5`After the conveyor installed, check whether there is any debris in the machine and if the lubrication is enough.
6.During the no-load test, the bearing should be oil-tight, and the bearing temperature should not be higher than 20℃. During the load test,the temperature of bearing should not exceed 30℃.
Attentions
(1) Lubricate the bearings, gears, chains and other transmission parts regularly.
(2)When the box-to-send machine stopped, check the abrasion of the spiral blade and repair and weld it when it wears seriously.
(3)The conveying amount can not be overloaded, otherwise the material will not be discharged, which may cause the screw shaft bending and box expansion.
(4) In the operation of the conveyor, if the noise is harsh, you should open the lid to check it and troubleshoot.
Screw Conveyor 325
Screw Conveyor 219
LOADING
WHY CHOOSE US